Our website uses cookies to improve your experience. To find out more including how to change your settings, please see our Privacy Policy. Alert Level Trading Updates Here. Supercheap Auto. Search Catalog.
My Store. Login Join. Need Help? Item No. If thinning is desired, product thickens, or for cleanup, use naptha, xylene xylol , or toluene toluol solvents. Allow 4 hours per coat for complete dry. Keep container tightly closed when not in use.
When applied properly Plasti Dip can be removed from most surfaces, if desired. Always protect surrounding areas from overspray. If runs or sags are experienced, move can further away from surface.
To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene xylol , or toluene toluol for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat.
Apply at least two additional coats of Plasti Dip. For best results, use a pumice crystalline silica grit. Results may vary with other grit additives. Plasti Dip Spray and Plasti Dip Spray 50 come in a gallon-sized container to be used for automotive purposes only. Apply using electric turbine style spray system or an HVLP spray gun with pressure pot system. All surfaces to be coated must be free of oils, grease, dirt, wax, and loose rust.
For best results the surfaces being coated must have a smooth unbroken OEM finish. Keep spray gun inches away from surface, applying wet overlapping coats. Allow 10 minutes dry time dry to the touch before applying additional coats. A minimum of 5 coats is recommended for best performance and easy removal. Mix Plasti Dip Spray thoroughly before each use and refilling of spray equipment.
A dry coating thickness of 10 mils minimum is recommended for best performance and easy removal. Allow 4 hours cure time for each coat applied before using. Avoid excessive air movement, heat and humidity while applying. Always use proper ventilation. Plasti Dip Spray Colors — suitable for application over most cast or calendered vinyl, cast vinyl with Poly Urethane clear laminated or Poly Urethane clear top coat finish, as well as most Poly Urethane protective films.
Plasti Dip Spray Clear — suitable for applications over cast vinyl, cast vinyl with Poly Urethane clear laminated or Poly Urethane clear top coat finish as well as most Poly Urethane protective films. Plasti Dip Spray 50 can be used and sold in all areas except in the following counties and areas within the state of California:.
Plasti Dip Spray 50 Colors and Clear — suitable for application over most calendered vinyl, cast vinyl with Poly Urethane clear laminated or Poly Urethane clear top coat finish as well as most Poly Urethane protective films.
Plasti Dip Spray 50 Colors and Clear — not recommended for applications over cast vinyl! Must be used in a well-ventilated area. Apply using HVLP spray system. Keep spray gun inches away from surface, applying wet over lapping coats.
Allow 10 — 20 minutes dry time before applying additional coats if needed. Refill spray system frequently. Avoid running empty which can draw air into spray system. Mix thoroughly before each use and refill. Apply additional coats as needed. Allow 4 hours cure time. Always use proper ventilation and protection. Allow 30 minutes dry time before applying additional coats if needed.
Allow 4 hours cure time, depending on temperatures and humidity. Avoid any changes in temperature or humidity while coats are drying to avoid blushing. Also, allow each coat to fully dry before applying more product. Use naphtha, xylene xylol or toluene toluol for cleanup. Seller cannot control use of this product and will not accept liability for more than product replacement. While Plasti Dip with a Primer undercoat can be removed with a great deal of effort, the Primer itself cannot be removed from the original surface once it has dried.
Use care when applying Plasti Dip Primer. Not intended for use with any other product. Plasti Dip Enhancers are specially designed to make our already outstanding Plasti Dip Colors even better. Our Enhancers are easy to use and will give any Plasti Dipped item a unique look. Plasti Dip Metalizer Enhancer is a shimmering, metallic finish while letting the color of the Plasti Dip underneath show through. Plasti Dip Pearlizer Enhancer will add a one-of-a-kind luster to any dried, cured Plasti Dip coating.
It gives a pearlescent sheen and gleamy luster to any Plasti Dip color. Plasti Dip Enhancers are formulated to bond with the unique chemical structure of cured Plasti Dip for superior adhesion and long life. Address MST-Design e. Email kontakt mst-design. Price incl. VAT, plus delivery. Micro Flakes Fuschia Hologram effect laquer. Micro Flakes Blue Holographic Metallic effect laquer 25 grams.
Contact information. Terms and Conditions. Privacy policy. Shipping information. CD 5. Micro Flakes Fuschia Hologram effect laquer
0コメント